The SWC-DB Client Library libswcdb - Configuration Properties

  • swc.mngr.port

    TYPE_UINT16 The Manager default port, value used if not defined in swc.mngr.host. \ default swc.mngr.port=15000

  • swc.rgr.port

    TYPE_UINT16 The Ranger default port, value used if not defined in swc.rgr.host. \ default swc.rgr.port=16000

  • swc.bkr.port

    TYPE_UINT16 The Broker default port, value used if not defined in swc.bkr.host. \ default swc.bkr.port=17000

The configuration properties applicable for dynamic reloading

  • swc.cfg.dyn.period

    TYPE_INT32_G The Dynamic cfg-file check interval in milliseconds, The check is Off if value is zero. \ default swc.cfg.dyn.period=600000

  • swc.mngr.host

    TYPE_STRINGS_G The Manager Host/s. The value format {ROLES}|{COLUMNS}|{ENDPOINTS}|PORT delimitted with | and aligned groupings of Role & Columns is require. The order is part of used configuration defnition to assign host-priority, 1st has initial preference for Active-State.

    The Full Format Description: \ {ROLES} - In curly-brackets comma-seperated-value, roles options: rangers(manages Rangers), schemas {manages Schemas}. example {rangers,schemas} \ [COLUMNS] - In square-brackets, an interval(by Hyphen -) of column-ids, From and NoValue/Zero is to Any. example [10-] = from 10 to Any. \ {ENDPOINTS} - A FQDN hostname or a comma-seperated-value of address (IPv4 & IPv6). example 192.168.0.1,::2 \ PORT - optional, If set use this Port with the listed endpoints. \ Multiple swc.mngr.host require aligment of Role/s and the Column-Intervals.

default swc.mngr.host=

Applicable Combinations of aligned groupings to Role & Columns \ Option 1: to the example - 4-groups, 3-hosts managers of Roles, 6-hosts managers of different 3-column intervals \ swc.mngr.host={rangers,schemas}|host-name-1 \ swc.mngr.host={rangers,schemas}|host-name-2|15001 \ swc.mngr.host={rangers,schemas}|host-name-3|15002 \ swc.mngr.host=[-4]|host-name-4 \ swc.mngr.host=[-4]|host-name-5 \ swc.mngr.host=[5-9]|host-name-6 \ swc.mngr.host=[5-9]|host-name-7 \ swc.mngr.host=[10-]|host-name-8 \ swc.mngr.host=[10-]|host-name-9 \ Option 2: to the example - 3-groups, 4-hosts managers of different Role, 3-hosts managers of all columns \ swc.mngr.host={schemas}|host-name-1 \ swc.mngr.host={schemas}|host-name-2 \ swc.mngr.host={rangers}|host-name-3 \ swc.mngr.host={rangers}|host-name-4 \ swc.mngr.host=[1-]|host-name-5 \ swc.mngr.host=[1-]|host-name-6 \ swc.mngr.host=[1-]|host-name-7 \ Option 3: to the example - 1-group, 4-hosts managers of all Roles and all columns, one-host is a configuration for a single-manager \ swc.mngr.host=host-name-1 \ swc.mngr.host=host-name-2 \ swc.mngr.host=host-name-3 \ swc.mngr.host=host-name-4

Empty swc.mngr.host property will result in WARN messages until configurations updated & reloaded. \ Empty cfg of mngr.host for role=BIT cid=THE_CID

  • swc.bkr.host

    TYPE_STRINGS_G The Broker Host/s. Client will try to establish connection and proceed with the Broker hosts available by the order specified. \ Value in format {ENDPOINTS}|PORT, if PORT not specified swc.bkr.port is applied, ENDPOINTS a FQDN or comma-separated IPs as IPv4,IPv4,IPv6.\ default swc.bkr.host=

  • swc.client.Bkr.connection.timeout

    TYPE_INT32_G The Broker client connect timeout in milliseconds. \ default swc.client.Bkr.connection.timeout=10000

  • swc.client.Bkr.connection.probes

    TYPE_UINT16_G The Broker client connect probes. \ default swc.client.Bkr.connection.probes=1

  • swc.client.Bkr.connection.keepalive

    TYPE_INT32_G The Broker client connection keepalive in milliseconds since last action. \ default swc.client.Bkr.connection.keepalive=30000

  • swc.client.Bkr.comm.encoder

    TYPE_ENUM_G The encoding to use in communication with Broker, options PLAIN/ZSTD/SNAPPY/ZLIB.

    If address of local & remote is the same, the Encoder is set to PLAIN.

default swc.client.Bkr.comm.encoder=ZSTD

  • swc.client.Rgr.connection.timeout

    TYPE_INT32_G The Ranger client connect timeout in milliseconds. \ default swc.client.Rgr.connection.timeout=10000

  • swc.client.Rgr.connection.probes

    TYPE_UINT16_G The Ranger client connect probes. \ default swc.client.Rgr.connection.probes=1

  • swc.client.Rgr.connection.keepalive

    TYPE_INT32_G The Ranger client connection keepalive in milliseconds since last action. \ default swc.client.Rgr.connection.keepalive=30000

  • swc.client.Rgr.comm.encoder

    TYPE_ENUM_G The encoding to use in communication with Ranger, options PLAIN/ZSTD/SNAPPY/ZLIB.

    If address of local & remote is the same, the Encoder is set to PLAIN.

default swc.client.Rgr.comm.encoder=ZSTD

  • swc.client.Rgr.range.res.expiry

    TYPE_INT32_G The Range(column id + range id) to Ranger Endpoint resolution expiry in milliseconds. \ default swc.client.Rgr.range.res.expiry=1800000

  • swc.client.Mngr.connection.timeout

    TYPE_INT32_G The Manager client connect timeout in milliseconds. \ default swc.client.Mngr.connection.timeout=10000

  • swc.client.Mngr.connection.probes

    TYPE_UINT16_G The Manager client connect probes. \ default swc.client.Mngr.connection.probes=1

  • swc.client.Mngr.connection.keepalive

    TYPE_INT32_G The Manager client connection keepalive in milliseconds since last action. \ default swc.client.Mngr.connection.keepalive=30000

  • swc.client.Mngr.comm.encoder

    TYPE_ENUM_G The encoding to use in communication with Manager, options PLAIN/ZSTD/SNAPPY/ZLIB.

    If address of local & remote is the same, the Encoder is set to PLAIN.

default swc.client.Mngr.comm.encoder=ZSTD

  • swc.client.Mngr.range.master.expiry

    TYPE_INT32_G The Located Master-Range and Ranger cache expiry in milliseconds. \ default swc.client.Mngr.range.master.expiry=1800000

  • swc.client.schema.expiry

    TYPE_INT32_G The Schema cache expiry in milliseconds. \ default swc.client.schema.expiry=1800000

  • swc.client.send.buffer

    TYPE_INT32_G The default Client send buffer size in bytes. \ default swc.client.send.buffer=8388608

  • swc.client.send.ahead

    TYPE_UINT8_G The default Client send number of buffers ahead. \ default swc.client.send.ahead=3

  • swc.client.send.timeout

    TYPE_INT32_G The default Client send timeout in milliseconds. \ default swc.client.send.timeout=800000

  • swc.client.send.timeout.bytes.ratio

    TYPE_INT32_G The default Client timeout ratio to bytes bytes / ratio = milliseconds added to swc.client.send.timeout(default Client send timeout). \ default swc.client.send.timeout.bytes.ratio=1000

  • swc.client.request.again.delay

    TYPE_INT32_G The Client request again delay in milliseconds. \ default swc.client.request.again.delay=500

  • swc.client.recv.buffer

    TYPE_INT32_G The default Client receive buffer size in bytes. \ default swc.client.recv.buffer=8388608

  • swc.client.recv.ahead

    TYPE_UINT8_G The default Client receive number of buffers ahead. \ default swc.client.recv.ahead=3

  • swc.client.recv.timeout

    TYPE_INT32_G The default Client receive timeout in milliseconds. \ default swc.client.recv.timeout=800000

extended/updated/version information available, for the Programs using SWC-DB Client Library with '--help' and '--help-config' arg

./aProgram --help;

./aProgram --help-config;